ACER ASPIRE SA20 User Manual

Aspire S Series  
User’s Guide  
Macrovision® copyright protection notice  
This product incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216,  
4,819,098, and 4,907,093 licensed for limited viewing uses only.  
Remark: All the drawings in the Guide are diagrams. About  
components’s quantity and style, substances shall take precedence.  
 
1
System Tour  
Your computer’s front panel consists of the following:  
Front panel  
1
2
3
4
5
6
No.  
1
Description  
No.  
2
Description  
Optical Drive  
Floppy Drive  
3
USB Ports  
4
Microphone Jack  
Power Button  
5
Speaker or Headphone Jack  
6
   
2
System Tour  
Rear panel  
Icon  
Description  
Power cord socket  
Voltage Selector Switch  
PS/2 Mouse Port  
PS/2 Keyboard Port  
Serial Port  
Monitor Connector  
Parallel Port  
Microphone-in jack  
Audio-out Jack  
Audio-in Jack  
USB Ports  
LAN Port  
 
3
System Features  
Your computer features:  
Performance  
Intel® Pentium® 4/Celeron® CPU  
DDR System Memory, 2 DIMM Slots, expandable to 2GB  
Power management function  
3.5 inch floppy drive  
CD-ROM, DVD-ROM, CD-RW (52X/24X), DVD/CD-RW combo or  
DVD writer  
High-capacity, Enhanced-IDE drive  
Support USB 2.0 high performance peripherals  
Multimedia  
3D quality audio system via onboard audio controller  
Audio-in/Line-in, Audio-out/Line-out, Headphone out and external  
Microphone in jacks  
Note: the system has two Microphone-in Jacks (front and rear)  
However, you can not use both of them at the same time. By  
default, you system enables your microphone-in jack in front and  
disables the one at the back.  
Connectivity  
Two PS/2 ports for keyboard and mouse  
One serial port  
One Parallel port  
One VGA port  
USB 2.0 ports  
High speed V.92, 56K fax/Data modem (optional)  
10Base-T/100Base-TX Ethernet Network  
       
4
System Tour  
System peripherals  
The Aspire S Series computer consists the system itself, and system  
peripherals, like a mouse, a keyboard and a set of speakers (optional).  
This section provides a brief description of basic system peripherals.  
Mouse(PS/2 or USB, manufacturing option)  
The included mouse is a standard two-button wheel mouse. Connect  
the mouse to the PS/2 mouse port or USB port on the back panel of the  
system.  
Keyboard(PS/2 or USB, manufacturing option)  
Connect the keyboard to the PS/2 keyboard port or USB port on the  
back panel of the system.  
     
5
Speakers  
For systems bundled with speakers, before powering on the system,  
connect the speaker cable to the audio out (external speaker) port on  
the back panel of the system.  
For more detailed information about the speakers, please refer to the  
included operating instructions.  
Note: speakers are optional and the appearance might be  
different depending on the actual product.  
 
6
System Tour  
System upgrade  
You can expand your Aspire S Series system quickly and easily by  
adding components. You can also upgrade the components of your  
Aspire S Series system.  
Open the computer  
Before removing any panels or covers, please make sure to shut off the  
computer and unplug the power cord from the outlet.  
Remove the two screws on the side panel.  
Slide the panel back and off.  
Set up new components  
You can only use components compatible with Aspire S Series  
computers. Before you choose new components, please ask your  
authorized Acer dealer whether the part will operate within your  
Aspire S Series system.  
In order to ensure proper setup and installation, please consult the  
instructions provided with your new components.  
Probable upgrades are:  
-
-
-
Upgrade to High Capacity HDD  
Expand high-level memory  
Upgrade from a CD-ROM drive to CD-RW, DVD-ROM, DVD/CD-  
RW combo, or DVD writer  
-
Install additional interface cards in empty PCI slots e.g., PCI  
fax/modem card  
     
7
Setting up your computer  
Aspire S Series is a versatile, high-power system, supporting Intel®  
Socket 478 CPUs. The computer uses PCI (Peripheral Component  
Interface) and AGP (Accelerated Graphics Port) design. This improves  
system efficiency and helps the system support varied multimedia and  
software applications.  
Your Aspire S Series has standard I/O (Input/Output) interfaces such as  
a serial port, parallel port, PS/2 keyboard and mouse ports, the system  
includes USB ports, two microphone ports and stereo line-out jacks(one  
at front and one at rear panel) and a stereo line-in Jack. The system can  
accommodate extra peripheral equipment through those I/O ports.  
Your system can also support an optional high-speed fax/data modem  
or an additional LAN (local area network) card.  
Furthermore, the system is compatible with Windows® XP Home,  
Windows® XP Professional operating systems.  
Necessary to know before Setup  
Prior to setting up your Aspire S Series System:  
Select a location  
Open package  
Select location  
Selecting the optimum location for your computer:  
Don't place the system too close to other electrical equipment.  
Don't place the system in high traffic areas or where the power  
cord or other cords may be stepped on.  
Avoid placing the system in any location that is excessively dusty or  
damp.  
Open package  
Open the package carefully and keep all packing materials for later  
use.  
       
8
Setting up your computer  
Ensure that all items are present and in good condition. If any of the  
following items are missing or appear damaged, contact your dealer  
immediately.  
Aspire S Series Series  
PS/2 or USB keyboard (manufacturing option)  
PS/2 or USB mouse (manufacturing option)  
Spearkers (for selected models only)  
User's Guide and Starter poster  
Other user documentation and third party software.  
Connecting the peripherals  
Note: Don't connect system power cord before connecting all  
peripherals to the system.  
Starting your computer  
After connecting all the peripheral equipment, start your computer  
according to the below steps:  
1
Power on all peripheral equipment, such as monitor, printer, fax,  
speakers etc.  
2
Turn on the system. Once the start-up process is complete, you can  
begin to use the computer.  
Shutting down your computer  
From the "Start" Menu, select "Shut Down" and click OK.  
In the event of a system crash, press and hold the power button on the  
front of the system for four seconds. After the system has shut down,  
turn off all peripheral devices.  
     
9
Troubleshooting  
The following questions are possible situations that may arise during  
the use of your computer and each is followed by simple answers and  
solutions to the situation.  
Q: I pressed the power switch but the system did not boot up.  
A: Check the LED located above the power switch.  
If the LED is not lit, no power is being applied to the system. Do any of  
the following:  
Check if the voltage selector switch located on the rear panel of  
the computer is set to the correct voltage.  
Check if you properly plugged the power cable into an electrical  
outlet.  
If you are using a power strip or AVR, make sure that it is plugged  
in and turned on.  
If the LED is lit, check the following:  
Is a non bootable (non system) diskette in the floppy drive? If yes,  
remove or replace it with a system diskette and press Ctrl + Alt +  
Del to restart your computer.  
Q: Nothing appears on the screen.  
A: Your computer's power management function automatically blanks  
the screen to save power. Press any key to turn the display back on.  
If pressing a key does not work, your computer. If restarting your  
computer does not work, contact your dealer or the technical support  
center for assistance.  
Q: The printer does not work.  
A: Do the following:  
Make sure that the printer is connected to a power outlet and that  
it is turned on.  
Make sure that the printer cable is connected securely to the  
system's parallel port and the corresponding port on the printer.  
For additional information concerning the printer, refer to the  
printer's documentation.  
Q: No sound comes out from the speakers.  
 
10  
Troubleshooting  
A: Check the following:  
The volume may be muted. Look for the Volume icon on the  
taskbar. If it is crossed-out, click on the icon and deselect the Mute  
option. You can also press the volume control/mute knob on your  
USB keyboard to toggle the mute function.  
If headphones, earphones, or external speakers are connected to  
the line-out jack of your computer, the internal or built-in  
speakers are automatically turned off.  
Q: System cannot read diskette, hard disk, CD or DVD information.  
A: Check the following:  
Make sure that you are using the correct type of media.  
Check if the diskette is formatted correctly. If not, format it again.  
Caution: If you reformat a diskette, you will lose any data on it.  
Make sure the diskette, CD or DVD is inserted into the drive correctly.  
Check if the CD or DVD is clean and not scratched.  
Check your drive by using a good (i.e., undamaged) diskette or a  
good disc. If your floppy drive, CD or DVD drive can not read the  
information on the good diskette, CD or DVD there may be a  
problem with the drive. Contact your dealer or technical support  
center for assistance.  
Q: System cannot write diskette, hard disk or disc.  
A: Check the following:  
Make sure the media is not write-protected.  
Make sure that you are using the correct type of diskette. Check if  
the diskette is formatted correctly. If not, format it again.  
Caution: If you reformat a diskette, you will lose any data on it.  
11  
Taking Care of your computer  
Please read the important instructions listed in this section. Following  
these instructions will help you maximize the durability of your  
computer.  
Important tips  
Do not expose the computer to direct sunlight. Do not place it  
near sources of heat, such as a radiator.  
Do not subject the computer to magnetic fields.  
Do not expose the computer to rain or moisture.  
Do not spill water on the computer.  
Do not subject the computer to heavy shock or vibration.  
Do not expose the computer to dust and dirt.  
Never place the system on uneven surfaces.  
Do not step on the power cord or place heavy objects on top of it.  
Carefully route the power cord and any cables away from personal  
traffic.  
When unplugging the power cord, do not pull on the cord itself  
but pull on the plug.  
The total ampere rating of the equipment plugged in should not  
exceed the ampere rating of the cord if you are using an extension  
cord. Also, the total current rating of all equipment plugged into a  
single wall outlet should not exceed the fuse rating.  
Check the documentation that came with your software programs  
to see if you can select other combinations of resolution and color.  
These adjustments could make viewing the screen more  
comfortable.  
Cleaning and servicing  
To clean your computer and keyboard  
1
Turn off the computer and unplug the power cord.  
2
Use a soft cloth moistened with water and gently wipe the exterior  
of the computer and the keyboard. Do not use liquid or aerosol  
cleaners.  
       
12  
Taking Care of your computer  
To clean your pointing device  
To clean your mouse (with rubber ball)  
1
2
3
Open the circular cover underneath the mouse.  
Take out the rubber ball and wipe it with a soft, damp cloth.  
Put the ball back and replace the cover.  
To clean your optical mouse  
For users of an optical mouse, refer to the documentation that came  
with your mouse for maintenance instructions.  
To clean your monitor  
Make sure that you keep your screen clean. For cleaning instructions,  
refer to the documentation that came with your monitor.  
When to contact a service technician  
If you dropped and damaged the computer.  
If liquid has been spilled into the computer.  
If the computer is not operating normally.  
Asking for technical assistance  
For technical assistance, contact your local dealer or distributor. You  
information on how and where to contact the service centers available  
in your area.  
         
13  
Energy Star Guidelines Compliance  
As an Engery Partner, Acer Inc., has determined that this product meets the  
Energy Star guidelines for energy efficiency.  
FCC notice  
This device has been tested and found to comply with the limits for a Class B  
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This device generates, uses, and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this device does cause harmful interference to radio or television  
reception, which can be determined by turning the device off and on, the user  
is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the device and receiver.  
Connect the device into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/television technician for help.  
Notice: Shielded cables  
All connections to other computing devices must be made using shielded cables  
to maintain compliance with FCC regulations.  
Notice: Peripheral devices  
Only peripherals (input/output devices, terminals, printers, etc.) certified to  
comply with the Class B limits may be attached to this equipment. Operation  
with non-certified peripherals is likely to result in interference to radio and TV  
reception.  
FCC Caution  
Any changes or modifications not expressly approved by the manufacturer  
could void the user's authority, which is granted by the Federal Communications  
Commission, to operate this computer.  
   
14  
Use conditions  
This part complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference,  
and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
Notice: Canadian users  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Remarque à l’intention des utilisateurs canadiens  
Cet appareil numérique de la classe B respected toutes les exigences du  
Règlement sur le materiel brouilleur du Canada.  
Declaration of Conformity for EU countries  
Hereby, Acer, declares that this personal computer is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC.  
Modem notices  
Notice for USA  
This equipment complies with Part 68 of the FCC rules. Located on the bottom  
side of the modem is a label that contains, among other information, the FCC  
Registration Number and Ringer Equivalence Number (REN) for this equipment.  
Upon request, you must provide this information to your telephone company.  
If your telephone equipment causes harm to the telephone network, the  
telephone company may discontinue your service temporarily. If possible, they  
will notify you in advance. But, if advance notice is not practical, you will be  
notified as soon as possible. You will also be informed of your right to file a  
complaint with the FCC.  
Your telephone company may make changes in its facilities, equipment,  
operations, or procedures that could affect the proper functioning of your  
equipment. If they do, you will be notified in advance to give you an  
opportunity to maintain uninterrupted telephone service.  
If this equipment should fail to operate properly, disconnect the equipment  
from the phone line to determine if it is causing the problem. If the problem is  
with the equipment, discontinue use and contact your dealer or vendor.  
       
15  
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or  
CSA Certified Telecommunication Line Cord.  
TBR 21  
This equipment has been approved [Council Decision 98/482/EC - "TBR 21"] for  
pan-European single terminal connection to the Public Switched Telephone  
Network (PSTN). However, due to differences between the individual PSTNs  
provided in different countries, the approval does not, of itself, give an  
unconditional assurance of successful operation on every PSTN termination  
point. In the event of problems, you should contact your equipment supplier in  
the first instance.  
Notice for Australia  
For safety reasons, only connect headsets with a telecommunications  
compliance label. This includes customer equipment previously labelled  
permitted or certified.  
Important safety instructions  
Read these instructions carefully. Save them for future reference.  
1
2
Follow all warnings and instructions marked on the product.  
Unplug this product from the wall outlet before cleaning. Do not use  
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
3
4
Do not use this product near water.  
Do not place this product on an unstable cart, stand, or table. The product  
may fall, causing serious damage to the product.  
5
Slots and openings are provided for ventilation; to ensure reliable  
operation of the product and to protect it from overheating. These  
openings must not be blocked or covered. The openings should never be  
blocked by placing the product on a bed, sofa, rug, or other similar surface.  
This product should never be placed near or over a radiator or heat  
register, or in a built-in installation unless proper ventilation is provided.  
6
7
This product should be operated from the type of power indicated on the  
marking label. If you are not sure of the type of power available, consult  
your dealer or local power company.  
Do not allow anything to rest on the power cord. Do not locate this  
product where persons will walk on the cord.  
     
16  
8
If an extension cord is used with this product, make sure that the total  
ampere rating of the equipment plugged into the extension cord does not  
exceed the extension cord ampere rating. Also, make sure that the total  
rating of all products plugged into the wall outlet does not exceed the fuse  
rating.  
9
Never push objects of any kind into this product through cabinet slots as  
they may touch dangerous voltage points or short out parts that could  
result in a fire or electric shock. Never spill liquid of any kind on the  
product.  
10 Do not attempt to service this product yourself, as opening or removing  
covers may expose you to dangerous voltage points or other risks. Refer all  
servicing to qualified service personnel.  
11 Unplug this product from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
a
b
c
d
When the power cord or plug is damaged or frayed.  
If liquid has been spilled into the product.  
If the product has been exposed to rain or water.  
If the product does not operate normally when the operating  
instructions are followed. Adjust only those controls that are covered  
by the operating instructions since improper adjustment of other  
controls may result in damage and will often require extensive work  
by a qualified technician to restore the product to normal condition.  
e
f
If the product has been dropped or the case has been damaged.  
If the product exhibits a distinct change in performance, indicating a  
need for service.  
12 Use only the proper type of power supply cord set (provided in your  
accessories box) for this unit. It should be a detachable type: UL listed/CSA  
certified, type SPT-2, rated 7A 125V minimum, VDE approved or its  
equivalent. Maximum length is 15 feet (4.6 meters).  
13 Always disconnect all telephone lines from the wall outlet before serving  
or disassembling this equipment.  
14 Avoid using a telephone line (other than cordless type) during an  
electrical storm. There may be a remote risk of electric shock from  
lightning.  
17  
Macrovision® copyright protection notice  
This product incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protection technology must  
be authorized by Macrovision Corporation, and is intended for home  
and other limited viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or disassembly is  
prohibited.  
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098,  
and 4,907,093 licensed for limited viewing uses only.  
Lithium battery statement  
CAUTION  
Danger of explosion if battery is incorrectly replaced. Replace only with  
the same or equivalent type recommended by the manufacturer.  
Dispose of used batteries according to local regulations. Recycle if at all  
possible.  
ADVARSEL!  
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning  
må kun ske med batteri af samme fabrikat og type. Léver det brugte  
batteri tilbage til leverandøren.  
ADVARSEL  
Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme  
batteritype eller en tilsvarende type anbefalt av apparatfabrikanten.  
Brukte batterier kasseres i henhold til fabrikantens instruksjoner.  
VARNING  
Explosionsfara vid felaktigt batteribyte. Anvãnd samma batterityp  
eller en ekvivalent typ som rekommenderas av apparattillverkaren.  
Kassera anvãnt batteri enligt fabrikantens instruktion.  
VAROITUS  
Päristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo  
ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty  
paristo valmistajan ohjeiden mukaisesti.  
VORSICHT!  
Explosionsgefahr bei unsachgemäßen Austausch der Batterie Ersatz  
nur durch denselben oder einem vom Hersteller empfohlenem  
   
18  
ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des  
Herstellers.  
Laser compliance statement  
The CD or DVD drive used with this computer is a laser product. The CD  
or DVD drive’s classification label (shown below) is located on the  
drive.  
CLASS 1 LASER PRODUCT  
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO  
BEAM.  
APPAREIL A LASER DE CLASSE 1 PRODUIT  
LASERATTENTION: RADIATION DU FAISCEAU LASER INVISIBLE EN CAS  
D’OUVERTURE. EVITTER TOUTE EXPOSITION AUX RAYONS.  
LUOKAN 1 LASERLAITE LASER KLASSE 1  
VORSICHT: UNSICHTBARE LASERSTRAHLUNG, WENN ABDECKUNG GEÖFFNET  
NICHT DEM STRAHLL AUSSETZEN  
PRODUCTO LÁSER DE LA CLASE I  
ADVERTENCIA: RADIACIÓN LÁSER INVISIBLE AL SER ABIERTO. EVITE  
EXPONERSE A LOS RAYOS.  
ADVARSEL: LASERSTRÅLING VEDÅBNING SE IKKE IND I STRÅLEN.  
VARO! LAVATTAESSA OLET ALTTINA LASERSÅTEILYLLE.  
VARNING: LASERSTRÅLNING NÅR DENNA DEL ÅR ÖPPNAD ÅLÅ TUIJOTA  
SÅTEESEENSTIRRA EJ IN I STRÅLEN  
VARNING: LASERSTRÅLNING NAR DENNA DEL ÅR ÖPPNADSTIRRA EJ IN I  
STRÅLEN  
ADVARSEL: LASERSTRÅLING NAR DEKSEL ÅPNESSTIRR IKKE INN I STRÅLEN  
 
19  
Declaration of Conformity  
Name of Manufacturer:  
Acer Inc.  
Address of Manufacturer:  
8F, 88, Sec. 1, Hsin Tai Wu Rd.,  
Hsichih, Taipei Hsien 221,  
Taiwan, R. O. C.  
Declares that product:  
Model:  
Personal Computer  
Aspire SA10/SA20/SA30  
Conforms to the EMC Directive 89/336/EEC as attested by conformity  
with the following harmonized standards:  
EN55022: 1994/A1: 1995/A2: 1997; AS/NZS CISPR 22: 2002: Limits and  
methods of measurement of Radio Interference characteristics of  
Information Technology Equipment.  
EN55024: 1998/A1: 2001; AS/NZS CISPR 24: 1997: Information  
technology equipment-Immunity characteristics-Limits and methods of  
measurement.  
Standard  
EN61000-4-2: 1995/A1: 1998/  
Description  
Electrostatic Discharge  
Results  
Pass  
Criteria  
B
A2: 2001  
AS/NZS 61000.4.2: 2002  
EN61000-4-3: 1996/A1: 1998/  
Radio-Frequency,  
Electromagnetic Field  
Pass  
Pass  
A
B
A2: 2001  
AS/NZS 61000.4.3: 1999  
EN61000-4-4: 1995/A1: 2001/  
Electrical Fast Transient/  
Burst  
A2: 2001  
AS/NZS 61000.4.4: 1999  
EN61000-4-5: 1995/A1: 2001  
Surge  
Pass  
Pass  
Pass  
B
AS/NZS 61000.4.5: 1999  
EN61000-4-6: 1996/A1: 2001  
AS/NZS 61000.4.6: 1999  
EN61000-4-8: 1993/A1: 2001  
Conductive Disturbance  
Power Frequency  
A
A
AS/NZS 61000.4.8: 2002  
EN61000-4-11: 1994/A1:  
Magnetic Field  
Voltage Dips / Short  
2001  
Interruption and Voltage  
AS/NZS 61000.4.11: 1999  
Variation  
>95% in 10ms  
30% in 500ms  
>95% in 5000ms  
Pass  
Pass  
Pass  
B
C
C
 
20  
Standard  
EN61000-3-2: 2000  
Description  
Limits for harmonics current  
Results  
Pass  
AS/NZS 61000.3.2: 2003  
EN61000-3-3: 1995  
emissions  
Limits for voltage fluctuations  
Pass  
A1: 2001/ AS/NZS 61000.3.3: 1998  
and flicker in low-voltage  
supply systems.  
Conforms to the Low Voltage Directive 73/23/EEC as attested by  
conformity with the following harmonized standard:  
EN60950: 2000 3rd: Safety of Information Technology Equipment  
Including electrical business equipment.  
This equipment has been approved to Council Decision 98/482/EC  
(CTR21) for pan- European single terminal connection to the Public  
Switched Telephone Network (PSTN).  
We, Acer Inc., hereby declare that the equipment bearing the trade  
name and model number specified above was tested conforming to  
the applicable Rules under the most accurate measurement standards  
possible, and that all the necessary steps have been taken and are in  
force to assure that production units of the same equipment will  
continue to comply with the requirements.  
Easy Lai / Director  
Acer Incorporated.  
al connection to the Public Switched Telephone Network (PSTN).  
We, Acer Inc., hereby declare that the equipment bearing the trade name and  
model number specified above was tested conforming to the applicable Rules  
under the most accurate measurement standards possible, and that all the  
21  
Federal Communications Comission  
Declaration of Conformity  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
The following local Manufacturer /Importer is responsible for this  
declaration:  
Product Name:  
Personal Computer  
Aspire SA10/SA20/SA30  
Acer America Corporation  
Model:  
Name of Responsible Party:  
Address of Responsible Party:  
2641 Orchard Parkway, San Jose,  
CA 95134, U. S. A.  
Mr. Young Kim/Director, Quality  
Manager, Acer America Corporation  
Contact Person:  
408-922-2909  
408-922-2606  
Phone No.:  
Fax No.:  
 
22  

York Ycjd18 Thru 60 User Manual
Sharp Mx Te10 User Manual
MAKITA MDE3440 User Manual
KENWOOD KM280 02 User Manual
HP ELITEBOOK 725 G3 User Manual
GE 25 02 User Manual
EMERSON ROXAR User Manual
CRAFTSMAN 316.381880 User Manual
BLACK DECKER NS118L User Manual
AT&T BLACKBERRY BOLD 9700 User Manual