ASRock Computer Hardware asrock User Manual

P4i65PE

User Manual

Version 1.1

Published May 2005

Contents

1 Introduction ................................................... ... 5

1.1 Package Contents................................................................ 5

1.2 Specifications ..................................................................... 6

1.3 Motherboard Layout ........................................................... 8

1.4 ASRock 8CH I/O ................................................................. 9

2 Installation...................................................... ... 10

Pre-installation Precautions......................................................... 10

2.1 CPU Installation.................................................................... 11

2.2 Installation of CPU Fan and Heatsink .................................. 11

2.3 Installation of Memory Modules (DIMM)............................... 12

2.4 Expansion Slots (PCI and AGP Slots)...................................14

2.5 Jumpers Setup.................................................................... 15

2.6 Onboard Headers and Connectors .................................... 16

2.7 Serial ATA (SATA) Hard Disks Installation ...........................19

3 BIOS SETUP UTILITY...................................... 20

3.1 Introduction .......................................................................... 20

3.1.1 BIOS Menu Bar ......................................................... 20

3.1.2 Navigation Keys ....................................................... 21

3.2 Main Screen ........................................................................ 21

3.3 Advanced Screen ............................................................... 21

3.3.1 CPU Configuration .................................................... 22

3.3.2 Chipset Configuration............................................... 23

3.3.3 ACPI Configuration ................................................... 25

3.3.4 IDE Configuration ...................................................... 26

3.3.5 PCIPnP Configuration ................................................ 28

3.3.6 Floppy Configuration ................................................ 29

3.3.7 Super IO Configuration............................................. 29

3.3.8 USB Configuration .................................................... 31

3.4 Hardware Health Event Monitoring Screen ........................ 31

3.5 Boot Screen ........................................................................ 32

3.5.1 Boot Settings Configuration ..................................... 32

3.6 Security Screen .................................................................. 33

3.7 Exit Screen .......................................................................... 33

4 Software Support

4.1 Install Operating System ............................................... 35

4.2 Support CD Information ................................................. 35

4.2.1 Running Support CD ............................................ 35

4.2.2 Drivers Menu ........................................................ 35

4.2.3 Utilities Menu ........................................................ 35

4.2.4 ASRock “PC-DIY Live Demo” Program.................. 35

4.2.5 Contact Information ............................................. 35

Chapter 1 Introduction

Thank you for purchasing ASRock P4i65PE motherboard, a reliable motherboard

produced under ASRock’s consistently stringent quality control. It delivers excellent

performance with robust design conforming to ASRock’s commitment to quality and

endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-

step guide to the hardware installation. Chapter 3 and 4 contain the configuration

guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be

updated, the content of this manual will be subject to change without

notice. In case any modifications of this manual occur, the updated

version will be available on ASRock. website without further notice. You

may find the latest memory and CPU support lists on our website as well.

ASRock website http://www.asrock.com

1.1 Package Contents

ASRock P4i65PE Motherboard

(ATX Form Factor: 12.0-in x 8.2-in, 30.5 cm x 20.8 cm)

ASRock P4i65PE Quick Installation Guide

ASRock P4i65PE Support CD

One 80-conductor Ultra ATA 66/100 IDE Ribbon Cable

One Ribbon Cable for a 3.5-in Floppy Drive

One Serial ATA (SATA) Data Cable

One Serial ATA (SATA) HDD Power Cable (Optional)

One ASRock 8CH I/O

1.2 Specifications

Platform:

ATX Form Factor: 12.0-in x 8.2-in, 30.5 cm x 20.8 cm

CPU:

Socket 478, supports Intel^®Pentium^®4 / Celeron^®(Prescott,

Northwood, Willamatte) processor

Chipsets:

Memory:

North Bridge:

Intel^®865PE chipset, FSB @ 800 / 533 / 400MHz,

supports Hyper-Threading Technology (see CAUTION 1)

South Bridge:

Intel^®ICH5, supports SATA 1.5Gb/s

4DDRDIMM Slots:DDR1,DDR2, DDR3, andDDR4

4 DDR DIMM Slots Supports PC3200 (DDR400) / PC2700

(DDR333) / PC2100 (DDR266), Max. 4GB

(see CAUTION 2)

Dual Channel Memory Technology support (see CAUTION 3)

IDE1: ATA 100 / Ultra DMA Mode 5

IDE:

IDE2: ATA 100 / Ultra DMA Mode 5

Supports up to 4 IDE devices

Serial ATA:

Supports up to 2 SATA devices at 1.5Gb/s data transfer rate

(Not Support “RAID and “Hot Plug” functions)

Supports up to 2 floppy disk drives

Floppy Port:

Audio:

7.1 channels AC’97 Audio

PCI LAN:

Speed: 802.3u (10/100 Ethernet), supports Wake-On-LAN

Hardware Monitor: CPU temperature sensing,

Chassis temperature sensing,

CPU overheat shutdown to protect CPU life

(ASRock U-COP)(see CAUTION 4),

CPU fan tachometer,

Chassis fan tachometer,

Voltage monitoring: +12V, +5V, +3.3V, Vcore

5 PCI slots with PCI Specification 2.3

1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 5)

8 USB 2.0 ports:

PCI slots:

AGP slot:

USB 2.0:

includes 4 default USB 2.0 ports on the rear panel,

plus two headers to support 4 additional USB 2.0 ports

(see CAUTION 6)

ASRock 8CH I/O:

1 PS/2 Mouse Port, 1 PS/2 Keyboard Port

1 Serial Port: COM1

1 Parallel Port (ECP/EPP Support)

4 Ready-to-Use USB 2.0 Ports

1 RJ-45 Port

Audio Jack: Side Speaker / Rear Speaker / Central/Bass /

Line In / Front Speaker / Microphone

(see CAUTION 7)

BIOS:

AMI legal BIOS,

Supports “Plug and Play”,

ACPI 1.1 compliance wake up events,

Supports jumperfree,

CPU frequency stepless control

(only for advanced users’ reference, see CAUTION 8)

Microsoft^®Windows^®98 SE / ME / 2000 / XP compliant

OS:

CAUTION!

1. About the setting of “Hyper Threading Technology”, please check page 23.

2. Please check the table below for the memory support frequency and its

corresponding CPU FSB frequency.

CPU FSB Frequency

Memory Support Frequency

DDR266, DDR320*, DDR400

DDR266, DDR333

800

533

400

DDR266

* When you use an FSB800-CPU on this motherboard, it will run at

DDR320 if you adopt a DDR333 memory module.

3. This motherboard supports Dual Channel Memory Technology. Before you

implement Dual Channel Memory Technology, make sure to read the

installation guide of memory modules on page 12 for proper installation.

4. While CPU overheat is detected, the system will automatically shutdown.

Before you resume the system, please check if the CPU fan on the

motherboard functions properly and unplug the power cord, then plug it

back again. To improve heat dissipation, remember to spray thermal

grease between the CPU and the heatsink when you install the PC system.

5. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!

It may cause permanent damage!

6. Power Management for USB 2.0 works fine under Microsoft^®Windows^®XP

SP1 / 2000 SP4. It may not work properly under Microsoft^®Windows^®98/

ME.

7. For microphone input, this motherboard supports both stereo and mono

modes. For audio output, this motherboard supports 2-channel, 4-channel,

6-channel, and 8-channel modes. Please check the table on page 9 for

proper connection.

8. Although this motherboard offers stepless control, it is not recommended

to perform over-clocking. Frequencies other than the recommended CPU

bus frequencies may cause the instability of the system or damage the

CPU.

1.3 Motherboard Layout

5 6 7

20.8cm (8.2 in)

PS2

PS2_USB_PWR1

Mouse

ATX12V1

CPU_FAN1

PGA478

USB 2.0

T: USB2

B: USB3

USB 2.0

T: USB0

B: USB1

Top:

RJ-45

Intel

865PE

Chipset

CD1

AGP 8X

1.5V_AGP1

PCI

LAN

PCI

2Mb

BIOS

PCI

USB2.0

JR1 JL1

AUDIO1

Intel

ICH5

PCI

SATA

USB45

PCI

7.1CH

AUDIO

CODEC

CMOS

Battery

USB67

P4i65PE

PCI

CLRCMOS0

PLED PWRBTN

FLOPPY1

HDLED RESET

IR1

SPEAKER1

GAME1

PANEL

PS2_USB_PWR1 Jumper

Clear CMOS Jumper (CLRCMOS0)

System Panel Header (PANEL1)

Chassis Speaker Header (SPEAKER 1)

Infrared Module Header (IR1)

USB 2.0 Header (USB67, Blue)

USB 2.0 Header (USB45, Blue)

Floppy Connector (FLOPPY1)

Game Connector (GAME1)

PCI Slots (PCI1- 5)

CPU Fan Connector (CPU_FAN1)

CPU Heatsink Retention Module

P4-478 CPU Socket

2 x 184-pin DDR DIMM Slots

(Dual Channel A: DDR1, DDR3; Blue)

2 x 184-pin DDR DIMM Slots

(Dual Channel B: DDR2, DDR4; Black)

ATX 12V Connector (ATX12V1)

Secondary IDE Connector (IDE2, Black)

Primary IDE Connector (IDE1, Blue)

AGP Slot (1.5V_AGP1)

Front Panel Audio Header (AUDIO1)

JR1 / JL1 Jumpers

BIOS FWH Chip

South Bridge Controller

North Bridge Controller

Secondary Serial ATA Connector (SATA2)

Primary Serial ATA Connector (SATA1)

Chassis Fan Connector (CHA_FAN1)

Internal Audio Connector: CD1 (Black)

ATX Power Connector (ATXPWR1)

1.4

Parallel Port

RJ-45 Port

Microphone (Pink)

USB 2.0 Ports (USB01)

Rear Speaker (Gray)

Side Speaker (Black)

Central / Bass (Orange)

Line In (Light Blue)

10 USB 2.0 Ports (USB23)

11 Serial Port: COM1

12 PS/2 Keyboard Port (Purple)

13 PS/2 Mouse Port (Green)

Front Speaker (Lime)

* If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See

the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels Front Speaker Rear Speaker

Central / Bass

Side Speaker

(No. 7)

(No. 3)

(No. 5)

(No. 4)

Chapter 2 Installation

P4i65PE is an ATX form factor (12.0-in x 8.2-in, 30.5 cm x 20.8 cm) motherboard.

Before you install the motherboard, study the configuration of your chassis to en-

sure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard com-

ponents or change any motherboard settings.

1. Unplug the power cord from the wall socket before touching any

component.

2. To avoid damaging the motherboard components due to static electricity,

NEVER place your motherboard directly on the carpet or the like. Also

remember to use a grounded wrist strap or touch a safety grounded

object before you handle components.

3. Hold components by the edges and do not touch the ICs.

4. Whenever you uninstall any component, place it on a grounded anti-

static pad or in the bag that comes with the component.

Before you install or remove any component, ensure that the power is

switched off or the power cord is detached from the power supply.

Failure to do so may cause severe damage to the motherboard,

peripherals, and/or components.

1 0

2.1 CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90° angle.

Step 2. Position the CPU directly above the socket such that its marked corner

matches the base of the socket lever.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the

CPU into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push down

the socket lever to secure the CPU. The lever clicks on the side tab to

indicate that it is locked.

CPU Marked Corner

Lift Lever Up to 90°

Socket Marked Corner

STEP 1:

STEP 2/STEP 3:

STEP 4:

Match The CPU Marked Corner

to The Socket Marked Corner

PushDownAndLock

TheSocketLever

Lift The Socket Lever Up to 90°

2.2 Installation of CPU Fan and Heatsink

This motherboard adopts 478-pin CPU socket to support Intel^®Pentium^®4

CPU. It requires larger heatsink and cooling fan to dissipate heat. You also

need to spray thermal grease between the CPU and the heatsink to

improve heat dissipation. Make sure that the CPU and the heatsink are

securely fastened and in good contact with each other. Then connect the

CPU fan to the CPU_FAN connector (CPU_FAN1, see page 8, No. 2). For

proper installation, please kindly refer to the instruction manuals of the

CPU fan and the heatsink.

1 1

2.3 Installation of Memory Modules (DIMM)

P4i65PE motherboard provides four 184-pin DDR (Double Data Rate) DIMM slots, and

supports Dual Channel Memory Technology. For dual channel configuration, you

always need to install identical (the same brand, speed, size and chip-type) DDR

DIMM pair in the slots of the same color. In other words, you have to install identical

DDR DIMM pair in Dual Channel A (DDR1 and DDR3; Blue slots; see p.8 No. 5) or

identical DDR DIMM pair in Dual Channel B (DDR2 and DDR4; Black slots; see p.8

No. 6), so that Dual Channel Memory Technology can be activated. This motherboard

also allows you to install four DDR DIMMs for dual channel configuration, and please

install identical DDR DIMMs in all four slots. You may refer to the Dual Channel

Memory Configuration Table below.

Dual Channel Memory Configurations

DDR1

DDR2

DDR3

DDR4

(Blue Slot)

Populated

(Black Slot) (Blue Slot)

(Black Slot)

(1)

(2)

(3)

Populated

1. If you want to install two memory modules, for optimal compatibility

and reliability, it is recommended to install them in the slots of the

same color. In other words, install them either in the set of blue slots

(DDR1 and DDR3), or in the set of black slots (DDR2 and DDR4).

2. If only one memory module or three memory modules are installed

in the DDR DIMM slots on this motherboard, it is unable to activate

the Dual Channel Memory Technology.

3. If a pair of memory modules is NOT installed in the same Dual

Channel, for example, installing a pair of memory modules in DDR1

and DDR2, it is unable to activate the Dual Channel Memory

Technology.

1 2

Installing a DIMM

Please make sure to disconnect power supply before adding or

removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break

on the slot.

notch

break

notch

break

The DIMM only fits in one correct orientation. It will cause permanent

damage to the motherboard and the DIMM if you force the DIMM into the

slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully

snap back in place and the DIMM is properly seated.

1 3

2.4 Expansion Slots (PCI and AGP Slots)

There are 5 PCI slots and 1 AGP slot on P4i65PE motherboard.

PCI slots: The PCI slots are used to install expansion cards that have the 32-bit

PCI interface.

AGP slot: The AGP slot is used to install a graphics card. The AGP slot has a

special locking mechanism which can securely fasten the graphics

card inserted.

Do NOT use a 3.3V AGP card on the AGP slot of P4i65PE-M

mtherboard! It may cause permanent damage!

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power

supply is switched off or the power cord is unplugged. Please read the

documentation of the expansion card and make necessary hardware

settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a

chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws

for later use.

Step 4. Align the card connector with the slot and press firmly until the card is

completely seated on the slot.

Step 5. Fasten the card to the chassis with screws.

Step 6. Replace the system cover.

1 4

2.5 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose pin1

and pin2 are “Short” when jumper cap is

placed on these 2 pins.

Jumper

Setting

Description

PS2_USB_PWR1

(see p.8 No. 1)

Short pin2, pin3 to enable

+5VSB (standby) for PS/2

or USB wake up events.

1_2

2_3

+5V

+5VSB

Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

JR1(see p.8 No. 25)

JL1(see p.8 No. 25)

JR1

JL1

Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panel

audio connectors can work.

Clear CMOS

(CLRCMOS0, 2-pin jumper)

2-pin jumper

(see p.8 No. 15)

Note: CLRCMOS0 allows you to clear the data in CMOS. The data in CMOS includes

system setup information such as system password, date, time, and system

setup parameters. To clear and reset the system parameters to default setup,

please turn off the computer andunplug the power cord, then use a jumper

cap to short the pins on CLRCMOS0 for 3 seconds. Please remember to

remove the jumper cap after clearing the CMOS. If you need to clear the CMOS

when you just finish updating the BIOS, you must boot up the system first, and

then shut it down before you do the clear-CMOS action.

1 5

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

FDD connector

(33-pin FLOPPY1)

FLOPPY1

Pin1

(see p.8 No. 21)

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the

connector.

Primary IDE connector (Blue) Secondary IDE connector (Black)

(39-pin IDE1, see p.8 No. 9)

(39-pin IDE2, see p.8 No. 8)

IDE2

IDE1

PIN1

connect the black end

to the IDE devices

80-conductor ATA 66/100 cable

connect the blue end

to the motherboard

Note: If you use only one IDE device on this motherboard, please set the IDE

device as “Master”. Please refer to the instruction of your IDE device vendor

for the details. Besides, to optimize compatibility and performance, please

connect your hard disk drive to the primary IDE connector (IDE1, blue) and

CD-ROM to the secondary IDE connector (IDE2, black).

Serial ATA Connectors

(SATA1: see p.8 No. 13)

These two Serial ATA (SATA)

connectors support SATA data

cables for internal storage

devices. The current SATA

interface allows up to 1.5 Gb/s

data transfer rate.

SATA2

SATA1

(SATA2: see p.8 No. 12)

Serial ATA (SATA)

Data Cable

Either end of the SATA data cable

can be connected to the SATA

hard disk or the SATA connector

on the motherboard.

1 6

Serial ATA (SATA)

Power Cable

(Optional)

Please connect the black end of

SATA power cable to the power

connector on the drive. Then

connect the white end of SATA

power cable to the power

connect to the

powersupply

connect to the SATA HDD

powerconnector

connector of the power supply.

USB 2.0 Header

(9-pin USB67)

ASRock 8CH I/O provides you

4 ready-to-use USB 2.0 ports on

the rear panel. If the rear USB

ports are not sufficient, this

USB 2.0 header is available to

support 2 extra USB 2.0 ports.

USB_PWR

P-6

P+6

GND

DUMMY

(see p.8, No. 19)

GND

P+7

P-7

USB_PWR

USB 2.0 Header

(9-pin USB45)

ASRock 8CH I/O^TMprovides you

4 ready-to-use USB 2.0 ports on

the rear panel. If the rear USB

ports are not sufficient, this

USB 2.0 header is available to

support 2 extra USB 2.0 ports.

USB_PWR

P-5

P+5

GND

DUMMY

(see p.8, No. 20)

GND

P+4

P-4

USB_PWR

Infrared Module Header

(5-pin IR1)

IRTX

This header supports an optional

wireless transmitting and

receiving infrared module.

+5V

CCIRRX

(see p.8, No. 18)

GND

IRRX

Internal Audio Connectors

(4-pin CD1)

These connectors allow you

to receive stereo audio input

from sound sources such as

a CD-ROM, DVD-ROM, TV

tuner card, or MPEG card.

CD-R

GND

CD-L

(CD1: see p.8, No. 28)

CD1

GND

Front Panel Audio Header

(9-pin AUDIO1)

This is an interface for the front

panel audio cable that allows

convenient connection and

control of audio devices.

+5VA

BACKOUT-R

BACKOUT-L

(see p.8, No. 24)

AUD-OUT-L

GND

AUD-OUT-R

MIC-POWER

MIC

1 7

PLED+

PLED-

PWRBTN#

GND

System Panel Header

(9-pin PANEL1)

This header accommodates

several system front panel

functions.

(see p.8 No. 16)

DUMMY

RESET#

GND

HDLED-

HDLED+

Chassis Speaker Header

Please connect the chassis

speaker to this header.

SPEAKER

DUMMY

+5V

(4-pin SPEAKER 1)

(see p.8 No. 17)

Chassis Fan Connector

(3-pin CHA_FAN1)

Please connect a chassis fan

cable to this connector and

match the black wire to the

ground pin.

GND

+12V

CHA_FAN_SPEED

(see p.8 No. 14)

CPU Fan Connector

(3-pin CPU_FAN1)

(see p.8 No. 2)

Please connect a CPU fan cable

to this connector and match

the black wire to the ground pin.

GND

+12V

CPU_FAN_SPEED

ATX Power Connector

Please connect an ATX power

supply to this connector.

(20-pinATXPWR1)

(see p.8 No. 29)

+5V

JBB1

JBX

Game Port Connector

(15-pin GAME1)

Connect a Game cable to this

connector if the Game port

bracket is installed.

MIDI_OUT

JBY

JBB2

MIDI_IN

(see p.8 No. 22)

+5V

JAB2

JAY

GND

JAX

JAB1

+5V

ATX 12V Connector

(4-pin ATX12V1)

Please note that it is necessary

to connect a power supply with

ATX 12V plug to this connector

so that it can provides sufficient

power. Failing to do so will cause

the failure to power up.

(see p.8, No. 7)

1 8

2.7

(

)

This motherboard adopts Intel ICH5 south bridge chipset that supports Serial ATA

(SATA) hard disks. You may install SATA hard disks on this motherboard for

internal storage devices. This section will guide you to install the SATA hard disks.

STEP1: Install the SATA hard disks into the drive bays of your chassis.

STEP2: Connect the SATA power cable to the SATA hard disk.

STEP3: Connect one end of the SATA data cable to the motherboard’s primary

SATA connector (SATA1).

STEP4: Connect the other end of the SATA data cable to the primary SATA hard

disk. If you just want to install only one SATA HDD, the installation

process is complete at this step. If you want to install two SATA HDDs,

please continue to do the following steps.

STEP5: Connect the SATA power cable to the SATA hard disk.

STEP6: Connect one end of the second SATA data cable to the motherboard’s

secondary SATA connector (SATA2).

STEP7: Connect the other end of the SATA data cable to the secondary SATA hard

disk.

Before you install OS into the SATA hard disk, you need to check and

ensure the configuration of the OnBoard IDE Operate Mode option in

BIOS setup is correct according to the condition of your system. For

the configuration details, please refer to the instruction on page 26.

1 9

Chapter 3 BIOS SETUP UTILITY

3.1 Introduction

This section explains how to use the BIOS SETUP UTILITY to configure your system.

The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may

run the BIOS SETUP UTILITY when you start up the computer. Please press <F2>

during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise,

POST will continue with its test routines.

If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by

pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system

chassis. You may also restart by turning the system off and then back on.

Because the BIOS software is constantly being updated, the

following BIOS setup screens and descriptions are for refer-

ence purpose only, and they may not exactly match what you

see on your screen.

3.1.1 BIOS Menu Bar

The top of the screen has a menu bar with the following selections:

Main

To set up the system time/date information

To set up the advanced BIOS features

To set up the PCI features

Advanced

PCIPnP

Boot

To set up the default system device to locate and load the

Operating System

Security

Chipset

Exit

To set up the security features

To set up the chipset features

To exit the current screen or the BIOS SETUP UTILITY

Use < > key or < > key to choose among the selections on the menu bar,

and then press <Enter> to get into the sub screen.

2 0

3.1.2

Please check the following table for the function description of each navigation

key.

Navigation Key(s)

Function Description

Moves cursor left or right to select Screens

Moves cursor up or down to select items

To change option for the selected items

To bring up the selected screen

+ / -

<Enter>

<F1>

<F9>

<F10>

<ESC>

To display the General Help Screen

To load optimal default values for all the settings

To save changes and exit the BIOS SETUP UTILITY

To jump to the Exit Screen or exit the current screen

3.2 Main Screen

When you enter the BIOS SETUP UTILITY, the Main screen will appear and display

the system overview

BIOS SETUP UTILITY

Advanced

H/W Monitor

Boot

Security

Exit

Main

Use [Enter], [TAB]

or [SHIFT-TAB] to

System Overview

select

field.

System Time

System Date

[14:00:09]

[Fri 10/22/2004]

Use [+] or [-] to

configure system Time.

BIOS Version

Processor Type

: P4i65PE BIOS P1.00

: Intel (R) Pentium (R) CPU 3.20 GHz

Processor Speed : 3200 MHz

Cache Size : 1024KB

Microcode Update : 0F34/0E

Select Screen

Select Item

Tab

F10

ESC

Change Field

Select Field

General Help

Load Defaults

Save and Exit

Exit

Total Memory

: 512MB

Dual-Channel Memory Mode

: 256MB/166MHz (DDR333)

: None

: 256MB/166MHz (DDR333)

: None

DIMM

System Time [Hour:Minute:Second]

Use this item to specify the system time.

System Date [Day Month/Date/Year]

Use this item to specify the system date.

3.3 Advanced Screen

In this section, you may set the configurations for the following items: CPU

Configuration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnP

Configuration, Floppy Configuration, SuperIO Configuration, and USB Configuration.

2 1

BIOS SETUP UTILITY

H/W Monitor Boot

Security

Exit

Main

Advanced

Configure CPU

Advanced Settings

WARNING : Setting wrong values in below sections

may cause system to malfunction.

CPU Configuration

Chipset Configuration

ACPI Configuration

IDE Configuration

PCIPnP Configuration

Floppy Configuration

SuperIO Configuration

USB Configuration

Select Screen

Select Item

Enter Go to Sub Screen

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

Setting wrong values in this section may cause

the system to malfunction.

3.3.1 CPU Configuration

BIOS SETUP UTILITY

Advanced

Select how to set the

CPU host frequency.

CPU Configuration

CPU Host Frequency

[Auto]

[200]

Actual Frequency (MHz)

Spread Spectrum

[Disabled]

Ratio Status

Ratio Actual Value

Locked

Select Screen

Select Item

[Enabled]

[Auto]

[Disabled]

CPU Thermal Throttling

Hyper Threading Technology

Max CPUID Value Limit

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

CPU Host Frequency

While entering setup, BIOS auto detects the present CPU host frequency of

this motherboard. The actual CPU host frequency will show in the following

item.

Spread Spectrum

This item should always be [Auto] for better system stability.

Ratio Status

This is a read-only item, which displays whether the ratio status of this

motherboard is “Locked” or “Unlocked”. If it shows “Unlocked”, you will find

an item Ratio CMOS Setting appears to allow you changing the ratio value

2 2

of this motherboard. If it shows “Locked”, then the item Ratio CMOS Set-

ting will be hidden. If you use the ratio value to time the CPU frequency, it will

be equal to the core speed of the installed processor.

Ratio Actual Value

This is a read-only item, which displays the ratio actual value of this

motherboard.

CPU Thermal Throttling

You may select [Enabled] to enable P4 CPU internal thermal control mecha-

nism to keep the CPU from overheated.

Hyper Threading Technology

To enable this feature, it requires a computer system with an Intel Pentium^®4

processor that supports Hyper-Threading technology and an operating sys-

tem that includes optimization for this technology, such as Microsoft^®Win-

dows^®XP. Set to [Auto] if using Microsoft^®Windows^®XP, or Linux kernel

version 2.4.18 or higher. This option will be hidden if the installed CPU does

not support Hyper-Threading technology.

Max CPUID Value Limit

For Prescott CPU only, some OSes (ex. NT4.0) cannot handle the function

with disable. This should be enabled in order to boot legacy OSes that cannot

support CPUs with extended CPUID functions.

3.3.2

BIOS SETUP UTILITY

Advanced

Chipset Configuration

Options

[Off]

[Auto]

[Disabled]

[Auto]

Bypass Access

DRAM Frequency

133MHz (DDR266)

166MHz (DDR333)

200MHz (DDR400)

Auto

Flexibility Option

Configure DRAM Timing by SPD

DRAM CAS# Latency

[4 Clocks]

[8 Clocks]

[4]

DRAM RAS# Precharge

DRAM RAS# to CAS# Delay

DRAM Precharge Delay

DRAM Burst Length

Select Screen

Select Item

[Disabled]

[PCI / AGP]

[64MB]

+ -

F10

Change Option

General Help

Load Defaults

Save and Exit

Memory Hole

Init. Graphic Adapter Priority

Graphics Aperture Size

[Enabled]

[Auto]

ESC Exit

OnBoard LAN

OnBoard AC'97 Audio

Bypass Access

This technology can provide users with the function of increasing the sys-

tem performance. The default value is [Disabled]. It will only work when you

use FSB800 CPU and DDR400 DRAM at the same time; otherwise, this option

will be hidden.

2 3

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically. You may also

select other value as operating frequency: [133MHz (DDR 266)],

[166MHz (DDR 333)], [200MHz (DDR 400)].

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for

memory compatibility when it is set to [Enabled].

Configure DRAM Timing by SPD

Select [Enabled] will configure the following items by the contents in the

SPD (Serial Presence Detect) device.

DRAM CAS# Latency

Use this item to adjust the means of memory accessing. Configuration

options: [Auto], [2.5], [2], and [3].

DRAM RAS# Precharge

This controls the idle clocks after a precharge command is issued.

Configuration options: [4 Clocks], [3 Clocks], and [2 Clocks].

DRAM RAS# to CAS# Delay

This controls the latency between the DRAM active command and the

read / write command. Configuration options: [4 Clocks], [3 Clocks],

and [2 Clocks].

DRAM Precharge Delay

This controls the number of DRAM clocks for RAS minimum. Configura-

tion options: [8 Clocks], [7 Clocks], [6 Clocks], and [5 Clocks].

DRAM Burst Length

DRAM Burst length can be set as [8] or [4].

Memory Hole

The default value of this item is [Disabled], or you may set the value of this

item as [15MB-16MB].

Init. Graphic Adapter Priority

This allows you to select [PCI/AGP] and [AGP/PCI] as the initial graphics

adapter priority. The default vaule is [PCI/AGP].

Graphics Aperture Size

It refers to a section of the PCI memory address range used for graphics

memory. It is recommended to leave this field at the default value unless the

installed AGP card’s specifications requires other sizes.

OnBoard LAN

This allows you to enable or disable the “OnBoard LAN” feature.

OnBoard AC’97 Audio

Select [Auto] or [Disabled] for the onboard AC’97 Audio feature.

2 4

3.3.3

BIOS SETUP UTILITY

Advanced

ACPI Configuration

Suspend To RAM

Select auto-detect or

disable the STR

feature.

[Disabled]

Restore on AC / Power Loss

Ring-In Power On

PCI Devices Power On

PS / 2 Keyboard Power On

RTC Alarm Power On

[Power Off]

[Disabled]

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Suspend to RAM

Use this item to select whether to auto-detect or disable the Suspend-to-

RAM feature. Select [Auto] will enable this feature if the OS supports it.

Restore on AC/Power Loss

Use this item to set the power state after an unexpected AC/power loss. If

[Power Off] is selected, the AC/power remains off when the power

recovers. If [Power On] is selected, the AC/power resumes and the sys-

tem starts to boot up when the power recovers.

Ring-In Power On

Use this item to enable or disable Ring-In signals to turn on the system from

the power-soft-off mode.

PCI Devices Power On

Use this item to enable or disable PCI devices to turn on the system from the

power-soft-off mode.

PS/2 Keyboard Power On

Use this item to enable or disable PS/2 keyboard to turn on the system from

the power-soft-off mode.

RTC Alarm Power On

Use this item to enable or disable RTC (Real Time Clock) to power on the

system.

2 5

3.3.4

BIOS SETUP UTILITY

Advanced

Set [Compatible Mode]

when both Legacy OS

(MS-DOS, Win Me / 98SE)

and SATA device

IDE Configuration

[Enhanced Mode]

[Both]

OnBoard IDE Operate Mode

OnBoard IDE Controller

are used.

Primary IDE Master

Primary IDE Slave

Secondary IDE Master

Secondary IDE Slave

SATA1

[Hard Disk]

Set [Enhanced Mode]

when Native OS

(Win 2000 / XP)

is used.

[Not Detected]

SATA2

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

OnBoard IDE Operate Mode

Please select [Compatible Mode] when you install legacy OS (Windows

ME / 98SE) into SATA device. If you install legacy OS into IDE HDD while

SATA devices are used, you also need to select [Compatible Mode].

If native OS (Windows 2000 / XP) is installed into SATA device, please

select [Enhanced Mode]. You also need to select [Enhanced Mode]

while native OS is installed into IDE HDD and SATA devices are used.

If you do not install any SATA device, please also select [Enhanced Mode]

no matter you use legacy OS or native OS for the system.

Please note that the following options will be varied depending on the

“OnBoard IDE Operate Mode” ([Compatible Mode] or [Enhanced

Mode]) that you selected.

When [Enhanced Mode] is selected:

OnBoard IDE Controller

You may enable either the primary IDE channel or the secondary IDE channel.

Or you may enable both the primary and the secondary IDE channels by

selecting [Both]. Set to [Disabled] will disable the both. Configuration options:

[Disabled], [Primary], [Secondary], [Both].

When [Compatible Mode] is selected

Combined Mode Option

It allows you to select between [Pri IDE + SATA] and [SATA + Sec IDE]. If

it is set to [Pri IDE + SATA], then the secondary IDE will not work. Likewise,

if it is set to [SATA + Sec IDE], then the primary IDE will not work.

Because Intel^®ICH5 south bridge only supports four IDE devices

under legacy OS (Windows ME / 98SE), you have to choose either

[Pri IDE + SATA] or [SATA + Sec IDE] when the installed SATA device

is used with legacy OS.

2 6

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will

use the “Primary IDE Master” as the example in the following instruction,

which can be applied to the configurations of “Primary IDE Slave”, “Sec-

ondary IDE Master”, “Secondary IDE Slave”, “SATA1” and “SATA2” as

well.

BIOS SETUP UTILITY

Advanced

Primary IDE Master

Select the type

of device connected

to the system.

Device

Vendor

Size

:Hard Disk

:ST340014A

:40.0 GB

LBA Mode

Block Mode

PIO Mode

Async DMA

Ultra DMA

S.M.A.R.T.

:Supported

:16Sectors

:MultiWord DMA-2

:Ultra DMA-5

:Supported

Type

[Auto]

[Disabled]

Select Screen

Select Item

LBA/Large Mode

Block (Multi-Sector Transfer)

PIO Mode

DMA Mode

S . M . A . R . T .

32Bit Data Transfer

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

TYPE

Use this item to configure the type of the IDE device that you specify.

Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].

[Not Installed]: Select [Not Installed] to disable the use of IDE device.

[Auto]: Select [Auto] to automatically detect the hard disk drive.

After selecting the hard disk information into BIOS, use a disk

utility, such as FDISK, to partition and format the new IDE hard

disk drives. This is necessary so that you can write or read

data from the hard disk. Make sure to set the partition of the

Primary IDE hard disk drives to active.

[CD/DVD]: This is used for IDE CD/DVD drives.

[ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device),

such as MO.

LBA/Large Mode

Use this item to select the LBA/Large mode for a hard disk > 512 MB under

DOS and Windows; for Netware and UNIX user, select [Disabled] to

disable the LBA/Large mode.

2 7

Block (Multi-Sector Transfer)

The default value of this item is [Auto]. If this feature is enabled, it will

enhance hard disk performance by reading or writing more data during

each transfer.

PIO Mode

Use this item to set the PIO mode to enhance hard disk performance by

optimizing the hard disk timing.

DMA Mode

DMA capability allows the improved transfer-speed and data-integrity for

compatible IDE devices.

S.M.A.R.T.

Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,

and Reporting Technology) feature. Configuration options: [Disabled], [Auto],

[Enabled].

32-Bit Data Transfer

Use this item to enable 32-bit access to maximize the IDE hard disk data

transfer rate.

3.3.5 PCIPnP Configuration

BIOS SETUP UTILITY

Advanced

Value in units of PCI

PCI / PnP Configuration

clocks for PCI device

latency timer

PCI Latency Timer

PCI IDE BusMaster

[32]

[Enabled]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

PCI Latency Timer

The default value is 32. It is recommended to keep the default value unless

the installed PCI expansion cards’ specifications require other settings.

PCI IDE BusMaster

Use this item to enable or disable the PCI IDE BusMaster feature.

2 8

3.3.6

In this section, you may configure the type of your floppy drive.

BIOS SETUP UTILITY

Advanced

Floppy Configuration

Select the type of

floppy drive

connected to the

system.

[1.44 MB 3¹"]

[Disabled]

Floppy

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

3.3.7 Super IO Configuration

BIOS SETUP UTILITY

Advanced

Configure Super IO Chipset

Allow BIOS to Enable

or Disable Floppy

Controller.

[Enabled]

[3F8 / IRQ4]

[Disabled]

[378]

[ECP + EPP]

[1.9]

[DMA3]

[IRQ7]

[Enabled]

[Disabled]

OnBoard Floppy Controller

Serial Port Address

Infrared Port Address

Parallel Port Address

Parallel Port Mode

EPP Version

ECP Mode DMA Channel

Parallel Port IRQ

OnBoard Game Port

OnBoard MIDI Port

Select Screen

Select Item

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

OnBoard Floppy Controller

Use this item to enable or disable floppy drive controller.

Serial Port Address

Use this item to set the address for the onboard serial port or disable it.

Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],

[2E8 / IRQ3].

Infrared Port Address

Use this item to set the address for the onboard infrared port or disable it.

Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].

2 9

Parallel Port Address

Use this item to set the address for the onboard parallel port or disable it.

Configuration options: [Disabled], [378], and [278].

Parallel Port Mode

Use this item to set the operation mode of the parallel port. The default

value is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPP

version in the following item, “EPP Version”. Configuration options:

[Normal], [Bi-Directional], and [ECP+EPP].

EPP Version

Use this item to set the EPP version. Configuration options: [1.9]

and [1.7].

ECP Mode DMA Channel

Use this item to set the ECP mode DMA channel. Configuration

options: [DMA0], [DMA1], and [DMA3].

Parallel Port IRQ

Use this item to set the IRQ for the parallel port. Configuration options:

[IRQ5] and [IRQ7].

OnBoard Game Port

Use this item to enable the Game Port or disable it.

OnBoard MIDI Port

Use this itme to select the address for the MIDI Port or disable it. Configura-

tion options: [Disabled], [300], and [330].

3 0

3.3.8

BIOS SETUP UTILITY

Advanced

USB Configuration

To enable or disable

the onboard USB

controllers.

USB Devices Enabled

None

[Enabled]

USB Controller

USB 2.0 Support

Legacy USB Support

[Enabled]

[Disabled]

Select Screen

Select Item

Change Option

General Help

Load Defaults

Save and Exit

F10

ESC Exit

USB Controller

Use this item to enable or disable the use of USB controller.

USB 2.0 Support

Use this item to enable or disable the USB 2.0 support.

Legacy USB Support

Use this item to enable or disable the support to emulate legacy I/O

devices such as mouse, keyboard,... etc. Or you may select [Auto] so

that the system will start to auto-detect; if there is no USB device

connected, “Auto” option will disable the legacy USB support.

3.4 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your system,

including the parameters of the CPU temperature, motherboard temperature, CPU fan

speed, chassis fan speed, and the critical voltage.

BIOS SETUP UTILITY

Boot

Security

Exit

Main

Advanced

H/W Monitor

Hardware Health Event Monitoring

CPU Temperature

M / B Temperature

37 C / 98 F

31 C / 87 F

CPU Fan Speed

Chassis Fan Speed

2463 RPM

N / A

Vcore

1.629V

3.306V

5.067V

11.890V

3.30V

5.00V

12.00V

Select Screen

Select Item

General Help

Load Defaults

Save and Exit

Exit

F10

ESC

3 1

3.5

In this section, it will display the available devices on your system for you to config-

ure the boot settings and the boot priority.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Boot Settings

Configure Settings

during System Boot.

Boot Settings Configuration

[1st Floppy Device]

[2nd Floppy Device]

[3rd Floppy Device]

1st Boot Device

2nd Boot Device

3rd Boot Device

Hard Disk Drives

Removable Drives

CD/DVD Drives

Select Screen

Select Item

Enter Go to Sub Screen

F10

General Help

Load Defaults

Save and Exit

ESC Exit

3.5.1 Boot Settings Configuration

BIOS SETUP UTILITY

Boot

Boot Settings Configuration

To enable or disable the

boot from network feature.

Boot From Network

Bootup Num-Lock

[Disabled]

[On]

Select Screen

Select Item

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Boot From Network

Use this item to enable or disable the Boot From Network feature.

Boot Up Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock

function after boot-up.

3 2

3.6

3.5.2

In this section, you may specify the boot sequence from the available devices

in your system.

BIOS SETUP UTILITY

Boot

Specifies the boot

sequence from the

available devices.

Boot Device Priority

[1st FLOPPY DRIVE]

[HDD: PM-MAXTOR 6L08]

[CD / DVD]

1st Boot Device

2nd Boot Device

3rd Boot Device

device enclosed in

parenthesis has been

disabled in the

corresponding type

menu.

Select Screen

Select Item

+ -

F10

ESC

Change Option

General Help

Load Defaults

Save and Exit

Exit

Likewise, you may also specify the boot sequence from the available devices

for the hard disk drives, the removable drives, and the CD/DVD drives.

In this section, you may set or change the supervisor/user password for the system.

For the user password, you may also clear it.

BIOS SETUP UTILITY

Main

Advanced

H/W Monitor

Boot

Security

Exit

Security Settings

Install or Change the

password.

Supervisor Password : Not Installed

User Password : Not Installed

Change Supervisor Password

Change User Password

Select Screen

Select Item

Enter Change

F10

ESC

General Help

Load Defaults

Save and Exit

Exit

3 3

3.7

BIOS SETUP UTILITY

H/W Monitro Boot

Main

Advanced

Security

Exit

Exit Options

Exit system setup

after saving the

changes.

Save Changes and Exit

Discard Changes and Exit

Discard Changes

F10 key can be used

for this operation.

Load Optimal Defaults

Select Screen

Select Item

Enter Go to Sub Screen

F10

General Help

Load Defaults

Save and Exit

ESC Exit

Save Changes and Exit

When you select this option, it will pop-out the following message, “Save

configuration changes and exit setup?” Select [OK] to save the changes

and exit the BIOS SETUP UTILITY.

Discard Changes and Exit

When you select this option, it will pop-out the following message, “Dis-

card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY

without saving any changes.

Discard Changes

When you select this option, it will pop-out the following message, “Dis-

card changes?” Select [OK] to discard all changes.

Load Optimal Defaults

When you select this option, it will pop-out the following message, “Load

optimal defaults?” Select [OK] to load the default values for all the setup

configurations.

3 4

Chapter 4 Software Support

4.1 Install Operating System

This motherboard supports various Microsoft^®Windows^®operating systems:

98 SE / ME / 2000 / XP. Because motherboard settings and hardware options vary,

use the setup procedures in this chapter for general reference only. Refer to your

OS documentation for more information.

4.2 Support CD Information

The Support CD that came with the motherboard contains necessary drivers and

useful utilities that enhance the motherboard features.

4.2.1 Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD

automatically displays the Main Menu if “AUTORUN” is enabled in your computer.

If the Main Menu did not appear automatically, locate and double click on the file

“ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

4.2.2 Drivers Menu

The Drivers Menu shows the available devices drivers if the system detects

installed devices. Please install the necessary drivers to activate the devices.

4.2.3 Utilities Menu

The Utilities Menu shows the applications software that the motherboard

supports. Click on a specific item then follow the installation wizard to install it.

4.2.4 ASRock “PC-DIY Live Demo” Program

ASRock presents you a multimedia PC-DIY live demo, which shows you how

to install your own PC system step by step. You can find the file through the

following path: ..\ MPEGAV \ AVSEQ01.DAT

To see this demo program, you can run Microsoft^®Media Player^®to play the file.

4.2.5 Contact Information

If you need to contact us or want to know more about ASRock Inc., welcome

to visit ASRock’s website at http://www.asrock.com; or you may contact your

dealer for further information.

3 5

HP Hewlett Packard LCD MONITORS S2321A User Manual
Hitachi CMP4121HDU User Manual
Hanns G Computer Monitor HSG1084 User Manual
EVGA nForce 750i SLI User Manual
EVGA 141 LF E658 KR User Manual
DPT SmartRaidV Century Ultra2 SCSI RAID Controller PM2654U2 R User Manual
Dell Computer Hardware I2200 User Manual
Cypress CY7C1320CV18 User Manual
AT T TL90070 User Manual
Asus Computer Monitor VE247H User Manual