Acer AL 718 User Manual

Table of Contents  
Precautions...................................................................................................................... 1  
Package contents............................................................................................................. 2  
Installation instructions ................................................................................................. 2  
Assembling the Monitor .............................................................................................. 2  
Detaching the Monitor................................................................................................. 2  
Adjusting the Viewing Angle ...................................................................................... 3  
Connecting the Devices ............................................................................................... 3  
Switching the Power .................................................................................................... 3  
Adjusting display settings .............................................................................................. 4  
External Controls......................................................................................................... 4  
OSD options .................................................................................................................... 5  
OSD Menu................................................................................................................... 5  
Brightness & Contrast............................................................................................. 5  
Tracking .................................................................................................................. 5  
Position ................................................................................................................... 6  
Color ....................................................................................................................... 6  
Other Controls......................................................................................................... 6  
Troubleshooting.............................................................................................................. 7  
General specifications..................................................................................................... 8  
Precautions  
The monitor may be damaged if placed too near a source of heat. Be  
aware of the location of radiators, cookers, open fires etc.  
Do not cover the slots and openings on the back or top of the cabinet as  
the monitor requires ventilation. The monitor should be located in a well-  
ventilated room to prevent the possibility of overheating.  
Do not allow sharp objects such as knives, pens, or pencils near the  
screen. If such objects touch the screen, the LCD panel will be  
permanently scratched.  
When cleaning this monitor, disconnect it from the electric socket to  
avoid any danger of electrocution. A soft, lint-free cloth should be used  
to clean the outside of the monitor. A cloth very slightly moistened with  
a mild detergent solution will clean stubborn stains. Keep liquids away  
from the display screen, including sprays. Do not spray liquid directly - it  
is best to lightly spray on to a cloth and wipe. If liquid gets inside the  
monitor it can cause electrical shock and/or damage to the unit.  
If you encounter a problem, please check the "Troubleshooting" section  
first. If this does not resolve the problem do not attempt to repair the  
monitor by yourself; opening or removing covers can lead to injury or  
death through electrocution among other hazards. Please contact a  
qualified engineer if you find the troubleshooting section does not help.  
1
Adjusting the Viewing Angle  
The viewing angle of the monitor ranges from 0°~20°.  
Caution: Make sure that the computer and the monitor are both disconnected  
from the power supply.  
Connecting the Devices  
c
d
e
Power Code  
Audio cable  
Attach the monitor to the power cord which should then be  
inserted into a properly grounded electric socket.  
Connect the audio input socket of the LCD monitor and the  
computer by means of the audio cable.  
Connect the signal cable to the VGA output socket of the  
graphics card on the computer. Then tighten the  
thumbscrews on the connector.  
VGA Cable  
(Attached)  
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make  
sure the shape of the plug matches the shape of the socket it is inserted  
into, and that none of the pins are bent or otherwise damaged.  
Switching the Power  
First, switch the power on to the monitor, then switch the power on to the computer.  
When you see the LED on the power button go green, this indicates the computer is  
ready for use. Allow about 10 seconds for the video signal to appear. If you do not see  
the green light on the power button or a video signal, check the connections.  
3
Adjusting display settings  
External Controls  
If OSD is active, press to enter a selection in  
OSD. If OSD is inactive, press and the monitor  
will automatically optimize the position, clock  
and phase of your display.  
1.  
AUTO  
Press to view OSD.  
Press again to exit.  
2
3
OSD Function  
POWER  
Power on/off  
Green: power on  
Orange: in sleep mode  
If OSD is active, press to select or adjust OSD  
options. If OSD is inactive, press once, then  
press the buttons marked < or > to adjust the  
volume.  
4
5
MINUS  
PLUS  
<
>
If OSD is active, press to select or adjust OSD  
options. If OSD is inactive, press once, then  
press the buttons marked < or > to adjust the  
volume.  
4
OSD options  
Please refer to "External Controls" on Page 5.  
To adjust the OSD settings:  
1. Press the MENU button to open the OSD menu.  
2. Use the buttons marked < or >, to highlight a control, then press the AUTO  
button to enter  
3. Use the buttons marked < or >, to adjust the control to the desired level.  
4. When you have finished making all selections, press the MENU button to exit  
the OSD. (Or the adjustment will auto-save after 45 seconds.)  
OSD Menu  
Brightness & Contrast  
BRIGHTNESS:  
This adjusts the brightness of the picture on  
the screen.  
CONTRAST:  
This adjusts dark and light shades of color  
relative to each other to achieve a  
comfortable contrast.  
Tracking  
CLOCK:  
If there are any vertical stripes seen on the  
background of the screen this renders them  
less noticeable by minimizing their size. It  
also changes the size of the horizontal  
screen.  
PHASE:  
This removes any horizontal distortion and  
makes the picture clear and sharp.  
5
Position  
V-Position:  
This adjusts the vertical.  
H-Position:  
This adjusts the horizontal.  
Color  
There are three ways of adjusting color:  
9300K: Bluish white  
6500K: Reddish white  
User defined:  
You can adjust the colors red, green and blue  
to the intensity you desire.  
Other Controls  
LANGUAGE:  
Select the OSD menu language from  
English, German, French, Italian and  
Spanish.  
OSD POSITION:  
This changes the position of the OSD  
window on the screen  
INFORMATION:  
This shows brief information on the screen.  
RESET:  
Recall to default settings  
6
Troubleshooting  
Problems  
Possible Solutions  
Power LED is not ON  
Check to see if the power switch is in the ON  
position.  
Ensure that the Power Cord is connected.  
No Picture  
Check to see if the power switch is in the ON  
position.  
Ensure that the Power Cord is connected.  
Ensure the video cable is securely connected  
to the back of the monitor and the computer.  
Move the mouse or press any key on the  
keyboard to bring the monitor out of "active  
off" mode.  
Picture shows inappropriate colors  
See "Color Adjustment" to adjust RGB color  
or to select color temperature.  
Picture bounces or a wave pattern is  
present in the picture  
Move or switch off electrical devices that  
may be causing interference.  
Inspect the monitor's video cable and ensure  
that none of the pins are bent.  
Image is not sized or centered  
properly  
Press select/auto key and the monitor will  
automatically optimize the position of your  
display.  
See "Position adjustment".  
Caution: Do not attempt to service the monitor yourself or open the computer  
yourself. Please refer all servicing to qualified service personnel if  
the problems cannot be solved in "Troubleshooting" section.  
7
General specifications  
Item  
Specification  
LCD Panel  
Display  
17-inch Flat panel active-matrix TFT LCD  
SXGA 1280×1024 pixels  
0.264 mm  
Max resolution  
Pixel Pitch  
Color  
16.2M  
Brightness  
300 cd/m² ( Typical)  
450:1 (Typical)  
4ms +16ms /20ms (Tr+Tf / typical)  
75° / 75°  
Contrast Ratio  
Response Time  
View Angle of Horizontal  
View Angle of Vertical  
External Controls  
Power Button  
Control Buttons  
OSD Function  
Brightness Contrast  
Color  
65° / 60°  
ON/ OFF  
Auto, MENU, <, >  
Brightness, Contrast  
Color temperature  
H-Position, V-Position  
Clock, Phase  
Position  
Tracking  
Other  
OSD Position, Language  
Video Interface  
Video  
Sync  
Plug & Play  
Analog 0.7V  
TTL (+/ -)  
DDC2B  
Power  
Power Source  
Power consumption during  
normal operation  
100~240V AC, 50/60 Hz  
< 50W  
Power consumption during  
active off operation  
< 1W  
Dimension and Weight  
Dimension (W×H×D)  
375 × 393 × 182 mm (with stand)  
375 × 321 × 62 mm (without stand)  
4.1 Kg/ 5.2 Kg  
Weight (Net/ Gross)  
8

HP Hewlett Packard HP blade PC bc1000 User Manual
Emprex LM2203 User Manual
Dell ST2210 User Manual
Creda X152 User Manual
Cisco Systems ISA500 User Manual
AT T ATT E2812B User Manual
ASW Global LLC Computer Hardware 3300565 User Manual
Asus VW 198 Series User Manual
Antec P193 User Manual
Ampro Corporation LITTLE BOARD P5X User Manual